How the Twister Trimmer T4 Works:
The Twister Trimmer T4 features an anodized aluminium body and 304 stainless-steel tumbler, with a built-in motor to turn the wet or dry tumbler. A solid blade underneath cuts away leaf matter as it makes contact with the blade through the fewer, small holes in the wet tumbler or the larger, more numerous holes in the dry tumbler. Over time essential oil deposits will begin to build up on the blade and the many of the moving parts, to lubricate and de-grease these parts we’ve included the Clear Cut Spray. The Clear Cut Spray provides two key benefits, firstly it helps to lubricate the trimmer using it’s hemp based, SAFE-certified formula. Secondly, it creates a non-stick barrier against essential oils, making cleaning much quick and easier.
The Twister Trimmer T4 uses Soft Tumble Technology and is mounted at a slight angle on a downward trajectory. The end product makes its way from the hopper, down the tumbler and out of the other end, getting precisely trimmed as it moves along. Once it leaves the system, it’s perfectly trimmed, ready for curing (if dry) or drying (if wet). The Twister Trimmer T4 uses a vacuum pump underneath the trimmer for two reasons. Firstly, the vacuum helps to pull the flowers down towards the blade via suction, this prevents them from crawling up the sides of the tumbler and focuses the flowers path towards the end of the chamber. Secondly, the vacuum pump pulls all the loose trimmings into the provided trim catchment sack, well away from your finished product.
While the Twister Trimmer T4 appears to cost a large amount of money, it is a solid investment in your growing future, saving vast amounts of time that would otherwise be spent manually trimming or employing others to do the work for you. This saves time and money that can be better spent on crop tending and keeping more of your profits in your pocket. A great benefit of the Twister Trimmer T4 is that very little of the product is physically handled, this helps to prevent bruising of the flowers, leading to an all-round better-quality end product in terms of smell, flavour and appearance.
How to Use the Twister Trimmer T4:
The Twister Trimmer T4 comes fully assembled, only needing to be mounted onto the vacuum pump to get started. Just adjust the rubber feet to a slight downward angle and you’re ready. As standard, the Twister Trimmer T4 comes with the wet tumbler. This has fewer, smaller holes than the dry version and is best used for product that has been freshly cut from a plant/s or partly dried beforehand. Place the Twister Trimmer T4 on top of the vacuum pump and seal the join between the two using the neoprene sleeve provided and attach the trim catchment sack. Once assembled turn on the Twister Trimmer T4 and place the flowers in the hopper, the hopper will guide the flowers towards the tumbler, where it will be rotated in the tumbler, by the motor and come into contact with the blade, cutting away the leaf matter. The flowers will travel down the tumbler as it’s at a slight angle, coming out the other end trimmed with the excess plant matter sucked away via the vacuum pump.
It’s important to keep the Twister Trimmer T4 clean while in use and well cleaned once its ready for storage. The Clear Cut Cleaner should be applied to the blade every 15-20 minutes and any sticky by-products removed to keep the Twister Trimmer T4 blade sharp. Use the blade adjustment knobs on the side of the trimmer to gain access to the blade and carefully scrape away any debris. After use, strip down the Twister Trimmer T4 and give it a thorough clean down.